The Fix 3™ Stud Anchor is a true-to-size, heavy duty, multi purpose expansion anchor, for permanent anchoring into concrete. Designed for heavy duty anchoring in non cracked concrete where reduced edge distance and anchor spacing is required. Undercut shoulder on the sleeve improves hole grip and increases load performance.

Features and Benefits
Substrates
Installation
Typical Applications
  • The Fix 3™ Stud Anchor diameter equals the required hole diameter providing maximum shear capacity for hole size and making drill bit selection Anchor design provides superior strength and reliability.
  • The anchor design ensures maximum expansion of the sleeve and pull- down on the These actions are both further assisted by the application of load.
  • The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during
  • Use threaded couplers where rod suspension applications are
  • Suitable for installation in concrete from 80mm thick such as pre- fabricated concrete
  • Concrete
  1. Drill the correct diameter hole to the same diameter as the FIX Z stud anchor
  2. Remove debris from hole by blowing out with compressed air or hand held blow out
  3. Install the anchor in the hole with a hammer until washer seats on
  4. Tighten bolt with a torque wrench to recommended assembly
  • Installing curtain walls, balustrades & barriers
  • Anchoring elevator guide rails
  • Anchoring structural steel columns/beams
  • Staduim seating & Pallet racking
  • Overhead suspension & Anchoring
Features and Benefits
  • The Fix 3™ Stud Anchor diameter equals the required hole diameter providing maximum shear capacity for hole size and making drill bit selection Anchor design provides superior strength and reliability.
  • The anchor design ensures maximum expansion of the sleeve and pull- down on the These actions are both further assisted by the application of load.
  • The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during
  • Use threaded couplers where rod suspension applications are
  • Suitable for installation in concrete from 80mm thick such as pre- fabricated concrete
Substrates
  • Concrete
Applications
  1. Drill the correct diameter hole to the same diameter as the FIX Z stud anchor
  2. Remove debris from hole by blowing out with compressed air or hand held blow out
  3. Install the anchor in the hole with a hammer until washer seats on
  4. Tighten bolt with a torque wrench to recommended assembly
Typical Applications
  • Installing curtain walls, balustrades & barriers
  • Anchoring elevator guide rails
  • Anchoring structural steel columns/beams
  • Staduim seating & Pallet racking
  • Overhead suspension & Anchoring
Fix 3™ Zn Plated - Recommended Working Loads in 40N/mm2 non-cracked Concrete
Thread
Ø
Embedment
Depth (mm)
Torque
(Nm)
Shear Load
(kN)*
Tension Load
(kN)*
M840153.35.4
M1050304.67.5
M1265509.111.1
M168010012.215.2
M2010016023.721.3

 

* Safety factor for all loads = 3

* This table does not consider edge distance and anchor spacing effects. Please refer to Ramset Design Guide for more information.

* Pull out test for single anchor = working load x 1.5

 

Fix 3™ Stud Anchor - Hex Nut - Zinc Plated
Part No.DescriptionThread
Ø
Max Fixture
Thickness (mm)*
Fixture Clearance  Hole Ø(mm)Overall Anchor
Length (mm)
Drilled Hole
Ø (mm)
Min Hole
Depth (mm)*
Order Qty
057450M8x55M85955850100
057451M8x70/20-10M820970855100
057452M8x90/40-30M84099085550
057455M8x130/80-70M880913085550
057461M10x75/15-5M10151275106550
057463M10x95/36-26M10361295106550
057465M10x125/65-55M106512125106525
057467M10x160/100-90M1010012160106525
057470M12x80/5M1051480128025
057471M12x100/25-10M122514100128025
057472M12x115/40-25M124014115128025
057474M12x140/65-50M126514140128025
057476M12x180/105-90M1210514180128025
057480M16x100/5M125181001610020
057481M16x125/30-15M1630181251610020
057482M16x170/55-60M1655181501610010
057483M16x170/75-60M1675181701610010
057484M16x185/90-75M1690181851610010
057490M20x125/10M1610221252012510
057491M20x165/50-25M2050221652012510
057492M20x220/105-80M20105222202012510

* Data based on minimum anchor depth

** Not belong to ETA, only for non-cracked concrete