Cast-In Anchor to suit various bolt type The TCM is a medium to heavy duty, cast-in ferrule. All steel threaded socket for casting into pre-cast concrete and institute concrete elements, giving a prefixed fastening point.
- Stress free anchoring close to edge and reduced anchor spacing
- Cast-in placement eliminates the need for drilling, this is particularly important where reinforcing is present in the fixing zone
- Ideal for shallow embedment as the anchor can be tied into the reinforcing to distribute the load over a wider area to become an intergral part of the reinforcing structure
- High tensile load carrying capacities as well as applications in tension zones
- Also available in A4 316 material for industrial environment
- Structural beams and columns
- Load bearing zones
- Cable trays
- Overhead piping
- Air condition ducts
- Securing of machines and equipment
- Tie back brackets for façade
- Concrete
- GRC
- Stress free anchoring close to edge and reduced anchor spacing
- Cast-in placement eliminates the need for drilling, this is particularly important where reinforcing is present in the fixing zone
- Ideal for shallow embedment as the anchor can be tied into the reinforcing to distribute the load over a wider area to become an intergral part of the reinforcing structure
- High tensile load carrying capacities as well as applications in tension zones
- Also available in A4 316 material for industrial environment
- Structural beams and columns
- Load bearing zones
- Cable trays
- Overhead piping
- Air condition ducts
- Securing of machines and equipment
- Tie back brackets for façade
- Concrete
- GRC
Unreinforced ferrule | Reinforced ferrule | |||||
| Thread Ø | Embedment Depth (mm | Torque (Nm) | Shear Load (kN) | Tensile Load (kN) | Shear Load (kN) | Tensile Load (kN) |
| M8 | 28 | 10 | 5.2 | 4.9 | - | - |
| M10 | 29 | 17 | 8.3 | 5.3 | 8.3 | 6.3 |
| M12 | 37 | 30 | 12.2 | 7.8 | 12.2 | 9.3 |
| M16 | 52 | 75 | 23.4 | 14.4 | 23.4 | 17.2 |
| M20 | 57 | 144 | 31.7 | 16.1 | 31.7 | 19.3 |
| M24 | 101 | 250 | 42.7 | 35.5 | 42.7 | 43.1 |
* Safety factor for all loads = 3
* This table does not consider edge distance and anchor spacing effects. Please refer to Ramset Design Guide for more information.
* Pull out test for single anchor = working load x 1.5
* Reinforcing TCM is TCM connected to reinforcing bar of specified length.
Unreinforced ferrule | Reinforced ferrule | |||||
| Thread Ø | Embedment Depth (mm | Torque (Nm) | Shear Load (kN) | Tensile Load (kN) | Shear Load (kN) | Tensile Load (kN) |
| M8 | 28 | 10 | 5.2 | 4.9 | - | - |
| M10 | 29 | 17 | 8.3 | 5.3 | 8.3 | 6.3 |
| M12 | 37 | 30 | 12.2 | 7.8 | 12.2 | 9.3 |
| M16 | 52 | 75 | 23.4 | 14.4 | 23.4 | 17.2 |
| M20 | 57 | 144 | 29.3 | 16.1 | 29.3 | 19.3 |
| M24 | 101 | 250 | 36.7 | 35.5 | 36.7 | 43.1 |
* Safety factor for all loads = 3
* This table does not consider edge distance and anchor spacing effects. Please refer to Ramset Design Guide for more information.
* Pull out test for single anchor = working load x 1.5
* Reinforcing TCM is TCM connected to reinforcing bar of specified length.
| Part no. Zn Plated | Part No. | Part No. SS | Thread Ø (mm) | Overall Anchor Length (mm) | Thread Length (mm) | Cross Hole to suit (Reinforced ferrule) (mm) | Order Qty |
| TCM8R | TCM8GH | TCM8RSS | M8 | 35 | 16 | R8x300 | 50 |
| TCM10R | TCM10GH | TCM10RSS | M10 | 44 | 20 | R8x300 | 50 |
| TCM12R | TCM12GH | TCM12RSS | M12 | 54 | 25 | R8x300 | 50 |
| TCM16R | TCM16GH | TCM16RSS | M16 | 75 | 32 | Y12x300 | 50 |
| TCM20R | TCM20GH | TCM20RSS | M20 | 80 | 38 | Y12x300 | 25 |
| TCM24R | TCM24GH | TCM24RSS | M24 | 125 | 50 | Y12x300 | 25 |
| Part No | Description | Qty (per box) |
| NP12 | Nail Plate to suit M12 Cast-in Anchor | 100 |
| NP16 | Nail Plate to suit M16 Cast-in Anchor | 100 |
| NP20 | Nail Plate to suit M20 Cast-in Anchor | 100 |
| NP24 | Nail Plate to suit M24 Cast-in Anchor | 100 |
| Part No | Description | Qty (per box) |
| NP12GLUE | Glue-on Plate 12mm Red | 100 |
| NP16GLUE | Glue-on Plate 16mm Green | 100 |
| NP20GLUE | Glue-on Plate 20mm Blue | 100 |
| NP24GLUE | Glue-on Plate 24mm Yellow | 100 |
| GPTAB | Double-sided Adhesive Tab | 100 |
Note: All glue-on plates do not come with Adhesive Tab in the box.
