產品優點
典型應用
基材
- 預埋式安裝無應力設計，有效減少錨栓所需間距
- 無需現場鑽孔，避免碰撞鋼筋，加快工序
- 特少埋深，便利設計，可繫於鋼筋，加強拉力強度
- 適用於非開裂及開裂混凝土
- 可提供鍍鋅，熱浸鍍鋅，A4不銹鋼材質
- 結構性加接作業
- 幕牆及預製件安裝
- 外牆背面支架固定
- 機電設備安裝
- 混凝土
- 玻璃纖維增強混凝土
產品特性
- Stress free anchoring close to edge and reduced anchor spacing
- Cast-in placement eliminates the need for drilling, this is particularly important where reinforcing is present in the fixing zoneIdeal for shallow embedment as the anchor can be tied into the reinforcing to distribute the load over a wider area to become an intergral part of the reinforcing structure
- High tensile load carrying capacities as well as applications in tension zones
- Also available in A4 316 material for industrial environment
典型應用
- Structural beams and columns
- Load bearing zones
- Cable trays
- Overhead piping
- Air condition ducts
- Securing of machines and equipment
- Tie back brackets for façade
基材
- Concrete
- GRC
TCM 預埋式錨栓 (A4不銹鋼)- 40N/mm2 非開裂混凝土中設計荷載數據參照
Unreinforced ferrule | Reinforced ferrule | |||||
| 螺桿直徑 Ø | 有效錨固深度(mm) | 安裝扭矩 (Nm) | 剪力設計值 (kN) | 拉力設計值 (kN) | 剪力設計值 (kN) | 拉力設計值 (kN) |
| M8 | 28 | 10 | 5.2 | 4.9 | - | - |
| M10 | 29 | 17 | 8.3 | 5.3 | 8.3 | 6.3 |
| M12 | 37 | 30 | 12.2 | 7.8 | 12.2 | 9.3 |
| M16 | 52 | 75 | 23.4 | 14.4 | 23.4 | 17.2 |
| M20 | 57 | 144 | 31.7 | 16.1 | 31.7 | 19.3 |
| M24 | 101 | 250 | 42.7 | 35.5 | 42.7 | 43.1 |
* 安全系數 = 3
*表中的數據不包含錨固件最小間距和結構邊緣距離之影響。詳情請參照設計指南。
*單一錨栓的拉力測試力 = 拉力設計力 x 1.5
*加固 TCM即TCM已繫上指定的加固鋼筋
TCM 預埋式錨栓 (鍍鋅/熱浸鍍鋅)- 40N/mm2 非開裂混凝土中設計荷載數據參照
Unreinforced ferrule | Reinforced ferrule | |||||
| 螺桿直徑 Ø | 有效錨固深度 (mm) | 安裝扭矩 (Nm) | 剪力設計值 (kN) | 拉力設計值 (kN) | 剪力設計值 (kN) | 拉力設計值 (kN) |
| M8 | 28 | 10 | 5.2 | 4.9 | - | - |
| M10 | 29 | 17 | 8.3 | 5.3 | 8.3 | 6.3 |
| M12 | 37 | 30 | 12.2 | 7.8 | 12.2 | 9.3 |
| M16 | 52 | 75 | 23.4 | 14.4 | 23.4 | 17.2 |
| M20 | 57 | 144 | 29.3 | 16.1 | 29.3 | 19.3 |
| M24 | 101 | 250 | 36.7 | 35.5 | 36.7 | 43.1 |
* 安全系數 = 3
*表中的數據不包含錨固件最小間距和結構邊緣距離之影響。詳情請參照設計指南。
*單一錨栓的拉力測試力 = 拉力設計力 x 1.5
*加固 TCM即TCM已繫上指定的加固鋼筋
TCM™ 預埋式錨栓
| 貨號 Zn Plated | 貨號 | 貨號 SS | 螺桿直徑 Ø (mm) | 錨栓總長度 (mm) | 螺桿長度 (mm) | 適合十字孔 (Reinforced ferrule) (mm) | 盒裝數量 |
| TCM8R | TCM8GH | TCM8RSS | M8 | 35 | 16 | R8x300 | 50 |
| TCM10R | TCM10GH | TCM10RSS | M10 | 44 | 20 | R8x300 | 50 |
| TCM12R | TCM12GH | TCM12RSS | M12 | 54 | 25 | R8x300 | 50 |
| TCM16R | TCM16GH | TCM16RSS | M16 | 75 | 32 | Y12x300 | 50 |
| TCM20R | TCM20GH | TCM20RSS | M20 | 80 | 38 | Y12x300 | 25 |
| TCM24R | TCM24GH | TCM24RSS | M24 | 125 | 50 | Y12x300 | 25 |
公制塑料釘接板
| 貨號 | 產品描述 | 盒裝數量 |
| NP12 | Nail Plate to suit M12 Cast-in Anchor | 100 |
| NP16 | Nail Plate to suit M16 Cast-in Anchor | 100 |
| NP20 | Nail Plate to suit M20 Cast-in Anchor | 100 |
| NP24 | Nail Plate to suit M24 Cast-in Anchor | 100 |
公制黏貼型塑料接板
| 貨號 | 產品描述 | 盒裝數量 |
| NP12GLUE | Glue-on Plate 12mm Red | 100 |
| NP16GLUE | Glue-on Plate 16mm Green | 100 |
| NP20GLUE | Glue-on Plate 20mm Blue | 100 |
| NP24GLUE | Glue-on Plate 24mm Yellow | 100 |
| GPTAB | Double-sided Adhesive Tab | 100 |
Note: All glue-on plates do not come with Adhesive Tab in the box.
