A high performance chemical epoxy adhesive. Fast cure with extended working time for use in tropical climate. Works well in dry, damp, wet and flooded holes.
Categories: Anchors Technology Chemical Anchors
Features and Benefits
Specification
Substrates
Applications
Formulated for hot or warm weather
- High strength epoxy
- Fire rated: tested up to 4 hours FRP
- Shorter curing time with extended working time
- Works in damp holes and underwater applications
- Low shrinkage, suitable for cored and oversized holes
- Virtually odorless, can be used indoors
- Easy handling and installations
- Re-sealable tip
EPCON G5™ is a heavy duty, pure epoxy injection chemical anchor.
Setting characteristics at 27ºC:
- Working time: 12 minutes
- Full cure time: 2
- Concrete (cracked and non-cracked)
- Solid block
- Solid brick
- Natural stone
- Reinforcing and starter bars
- Underwater fixings
- Diaphragm wall fixings
- Guard rail fixings
- Parapet wall fixings
- Tunnel fixings
- Floor slabs
Features and Benefits
Formulated for hot or warm weather
- High strength epoxy
- Fire rated: tested up to 4 hours FRP
- Shorter curing time with extended working time
- Works in damp holes and underwater applications
- Low shrinkage, suitable for cored and oversized holes
- Virtually odorless, can be used indoors
- Easy handling and installations
- Re-sealable tip
Specification
EPCON G5™ is a heavy duty, pure epoxy injection chemical anchor.
Setting characteristics at 27ºC:
- Working time: 12 minutes
- Full cure time: 2
Substrates
- Concrete (cracked and non-cracked)
- Solid block
- Solid brick
- Natural stone
Applications
- Reinforcing and starter bars
- Underwater fixings
- Diaphragm wall fixings
- Guard rail fixings
- Parapet wall fixings
- Tunnel fixings
- Floor slabs
EPCON G5™ PRO - Recommended Working Loads in 40N/mm2 non-cracked Concrete
| Thread Ø | Hole Ø (mm) | Fixture Hole Ø (mm) | Embedment Depth (mm) | Hole Depth (mm) | Torque (Nm) | Shear Load (kN) | Tension Load (kN) |
| M8 | 10 | 10 | 80 | 80 | 10 | 4.3 | 8.7 |
| M10 | 12 | 12 | 90 | 90 | 20 | 6.7 | 13.7 |
| M12 | 14 | 14 | 110 | 110 | 40 | 10.0 | 19.7 |
| M16 | 18 | 18 | 125 | 125 | 80 | 18.3 | 26.1 |
| M20 | 22 | 22 | 170 | 170 | 120 | 28.7 | 44.4 |
| M24 | 26 | 26 | 210 | 210 | 160 | 41.3 | 65.9 |
| M30 | 35 | 35 | 280 | 280 | 200 | 65.3 | 86.9 |
ChemSet™ Anchor Studs - Zinc Plated 6μm minimum 45º Single Cut
| Part No. | Description | Anchor Size (mm) | Stud Length (mm) | Max Fixture Thickness (mm) | Drilled Hole Ø (mm) | Min Hole Depth (mm) | Order Qty |
| CS08110 | CS08110 Chemset Studs | 8 | 110 | 15 | 10 | 80 | 10 |
| CS10130 | CS10130 Chemset Studs | 10 | 130 | 20 | 12 | 90 | 10 |
| CS12160 | CS12160 Chemset Studs | 12 | 160 | 25 | 14 | 110 | 10 |
| CS16190 | CS16190 Chemset Studs | 16 | 190 | 35 | 18 | 125 | 10 |
| CS20260 | CS20260 Chemset Studs | 20 | 260 | 65 | 25 | 170 | 6 |
| CS24300 | CS24300 Chemset Studs | 24 | 300 | 63 | 28 | 210 | 6 |
| CS30380 | CS30380 Chemset Studs | 30 | 380 | 70 | 35 | 280 | 5 |
ChemSet™ Anchor Studs - Hot Dipped Galvanised 45μm minimum 45º Single Cut
| Part No. | Description | Anchor Size (mm) | Stud Length (mm) | Max Fixture Thickness (mm) | Drilled Hole Ø (mm) | Min Hole Depth (mm) | Order Qty |
CS08110GH | CS08110GH Chemset Studs | 8 | 110 | 15 | 10 | 80 | 10 |
CS10130GH | CS10130GH Chemset Studs | 10 | 130 | 20 | 12 | 90 | 10 |
| CS12160GH | CS12160GH Chemset Studs | 12 | 160 | 25 | 14 | 110 | 10 |
| CS16190GH | CS16190GH Chemset Studs | 16 | 190 | 35 | 18 | 125 | 10 |
| CS20260GH | CS20260GH Chemset Studs | 20 | 260 | 65 | 25 | 170 | 6 |
| CS24300GH | CS24300GH Chemset Studs | 24 | 300 | 63 | 28 | 210 | 6 |
| CS30380GH | CS30380GH Chemset Studs | 30 | 380 | 70 | 35 | 280 | 5 |
ChemSetTM Anchor Studs - Stainless Steel A4 316 45o Single Cut
| Part No. | Description | Anchor Size (mm) | Stud Length (mm) | Max Fixture Thickness (mm) | Drilled Hole Ø (mm) | Min Hole Depth (mm) | Order Qty |
| CS08110SS | CS08110SS Chemset Studs | 8 | 110 | 15 | 10 | 80 | 10 |
| CS10130SS | CS10130SS Chemset Studs | 10 | 130 | 20 | 12 | 90 | 10 |
| CS12160SS | CS12160SS Chemset Studs | 12 | 160 | 25 | 14 | 110 | 10 |
| CS16190SS | CS16190SS Chemset Studs | 16 | 190 | 35 | 18 | 125 | 10 |
| CS20260SS | CS20260SS Chemset Studs | 20 | 260 | 65 | 25 | 170 | 6 |
| CS24300SS | CS24300SS Chemset Studs | 24 | 300 | 63 | 28 | 210 | 6 |
| CS30380SS | CS30380SS Chemset Studs | 30 | 380 | 70 | 35 | 280 | 5 |
ATP Stainless Steel A4 Internal Threaded Socket (to match Epcon C8/G5)
| Part No. | Description | Anchor Size (mm) | Max Fixture Thickness (mm) | Min Hole Depth (mm) | Order Qty |
| 062860 | ATP Socket M8X60 A4 | 8 | 14 | 25 | 10 |
| 062960 | ATP Socket M10X65 A4 | 10 | 20 | 32 | 10 |
| 063100 | ATP Socket M12X75 A4 | 12 | 24 | 38 | 10 |
| 051175 | ATP Socket M16X125 A4 | 16 | 28 | 50 | 10 |
