Cast-In Anchor to suit various bolt type The CIM is a medium to heavy duty, cast-in ferrule. All steel threaded socket for casting into pre-cast concrete and institute concrete elements, giving a prefixed fastening point.
Categories: Anchors Technology Cast-in Anchors
Product Advantages
Typical Applications
Substrates
- Stress free anchoring close to edge and reduced anchor spacing
- Cast-in placement eliminates the need for drilling, this is particularly important where reinforcing is present in the fixing zone
- Ideal for shallow embedment as the anchor can be tied into the reinforcing to distribute the load over a wider area to become an intergral part of the reinforcing structure
- High tensile load carrying capacities as well as applications in tension zones
- Simple cost effective design with material or finishing ranging from ZP, HDG, A2 and A4
- Structural connections
- Curtain wall and facade fixings (concrete, GRC etc)
- Anchoring bracing and precast panels
- Concrete
- GRC
Product Advantages
- Stress free anchoring close to edge and reduced anchor spacing
- Cast-in placement eliminates the need for drilling, this is particularly important where reinforcing is present in the fixing zone
- Ideal for shallow embedment as the anchor can be tied into the reinforcing to distribute the load over a wider area to become an intergral part of the reinforcing structure
- High tensile load carrying capacities as well as applications in tension zones
- Simple cost effective design with material or finishing ranging from ZP, HDG, A2 and A4
Typical Applications
- Structural connections
- Curtain wall and facade fixings (concrete, GRC etc)
- Anchoring bracing and precast panels
Substrates
- Concrete
- GRC
CIM Cast-in Anchors (Stainless Steel A2/A4) - Recommended Working Loads in 40N/mm2 non-cracked Concrete
Unreinforced ferrule | Reinforced ferrule | |||||
| Thread Ø | Embedment Depth (mm | Torque (Nm) | Shear Load (kN) | Tensile Load (kN) | Shear Load (kN) | Tensile Load (kN) |
| M6 | 26 | 5 | 2.8 | 3.2 | 2.8 | 3.9 |
| M8 | 26 | 10 | 5.2 | 4.9 | 5.2 | 5.9 |
| M10 | 35 | 17 | 8.3 | 5.0 | 8.3 | 6.3 |
| M12 | 46 | 30 | 12.0 | 7.3 | 12.0 | 9.1 |
| M16 | 57 | 75 | 22.1 | 12.3 | 22.1 | 15.3 |
| M20 | 67 | 144 | 26.0 | 13.9 | 26.0 | 17.4 |
| M24 | 112 | 250 | 33.7 | 32.5 | 33.7 | 40.7 |
* Safety factor for all loads = 3
* This table does not consider edge distance and anchor spacing effects. Please refer to Ramset Design Guide for more information.
* Pull out test for single anchor = working load x 1.5
* Reinforcing CIM is CIM connected to reinforcing bar of specified length.
CIM Cast-in Anchors (Zn Plated) - Recommended Working Loads in 40N/mm2 non-cracked Concrete
| Part no. Zn Plated | Part No. | Part No. SS316 | Thread Ø (mm) | Overall Anchor Length (mm) | Thread Length (mm) | Cross Hole to suit (Reinforced ferrule) (mm) | Order Qty |
| CIM06 | CIM06SS | CIM06SS316 | M6 | 35 | 14 | 7 | 50 |
| CIM08 | CIM08SS | CIM08SS316 | M8 | 35 | 16 | 9 | 50 |
| CIM10 | CIM10SS | CIM10SS316 | M10 | 44 | 22 | 12 | 50 |
| CIM12 | CIM12SS | CIM12SS316 | M12 | 55 | 25 | 14 | 50 |
| CIM16 | CIM16SS | CIM16SS316 | M16 | 70 | 32 | 18 | 50 |
| CIM20 | CIM20SS | CIM20SS316 | M20 | 80 | 38 | 22 | 25 |
| CIM24 | CIM24SS | CIM24SS316 | M24 | 125 | 50 | 27 | 25 |
CIM Cast-in Anchors
| Part no. Zn Plated | Part No. | Part No. SS316 | Thread Ø (mm) | Overall Anchor Length (mm) | Thread Length (mm) | Cross Hole to suit (Reinforced ferrule) (mm) | Order Qty |
| CIM06 | CIM06SS | CIM06SS316 | M6 | 35 | 14 | 7 | 50 |
| CIM08 | CIM08SS | CIM08SS316 | M8 | 35 | 16 | 9 | 50 |
| CIM10 | CIM10SS | CIM10SS316 | M10 | 44 | 22 | 12 | 50 |
| CIM12 | CIM12SS | CIM12SS316 | M12 | 55 | 25 | 14 | 50 |
| CIM16 | CIM16SS | CIM16SS316 | M16 | 70 | 32 | 18 | 50 |
| CIM20 | CIM20SS | CIM20SS316 | M20 | 80 | 38 | 22 | 25 |
| CIM24 | CIM24SS | CIM24SS316 | M24 | 125 | 50 | 27 | 25 |
Metric Plastic Nail Plates
| Part No | Description | Qty (per box) |
| NP12 | Nail Plate to suit M12 Cast-in Anchor | 100 |
| NP16 | Nail Plate to suit M16 Cast-in Anchor | 100 |
| NP20 | Nail Plate to suit M20 Cast-in Anchor | 100 |
| NP24 | Nail Plate to suit M24 Cast-in Anchor | 100 |
Glue-on Metric Plate
| Part No | Description | Qty (per box) |
| NP12GLUE | Glue-on Plate 12mm Red | 100 |
| NP16GLUE | Glue-on Plate 16mm Green | 100 |
| NP20GLUE | Glue-on Plate 20mm Blue | 100 |
| NP24GLUE | Glue-on Plate 24mm Yellow | 100 |
| GPTAB | Double-sided Adhesive Tab | 100 |
Note: All glue-on plates do not come with Adhesive Tab in the box.
